AV6471A Multifunctional Fiber Fusion Splicer

BUSINESS

Calibration and Test
Intelligent Equipment

Special Optical Fiber Manufact Optical Fiber Coil Manufacturi Supporting Equipments for Fibe
Photoelectric Instrument

Photoelectric Equipment Imported Equipment Fiber Cable and Optical Device
Program Consultation

Training and Consultation Hydrophone Solution Fibre Gyroscope Solution

+86-27-87981730
+86-27-87981619
ovmc@ggjlz.com
80# Fifth Hi-tech Avenue,East Lake Hi-tech Development zone,Wuhan,China

Your location：Photoelectric Instrument >Photoelectric Equipment

AV6471A Multifunctional Fiber Fusion Splicer

Product introduction

AV6471A multifunctional optical fiber fusion splicer is a brand-new designed optical fiber splicing equipment. Optical fiber splicing application specially designed for FTTH environment: the lightweight body and fine design make it easy to handle even in a narrow working environment; the novel optical fiber imaging system and pure digital design make the image display more delicate and clear; real-time embedded operation The system provides a friendly operation interface and richer functions; the built-in large-capacity high-performance lithium battery provides a reliable guarantee for long-term field work; the real-time compensation system for temperature, humidity and air pressure greatly improves the equipment's ability to adapt to changes in harsh external environments. It provides a guarantee for the consistency of low-loss connection in different environments.

main feature:

A variety of special fixtures, suitable for both FTTH environment and ordinary fiber optic engineering
Precise core alignment for low-loss connections
9 seconds for welding, 30 seconds for heat shrinking
Simultaneous display of X/Y axis, 304 times magnification
It can be set to close the draft shield to automatically start welding, and close the heating cover to automatically start heat shrinking
Real-time discharge correction, no need to adjust parameters
Long electrode life, up to 4000 discharges
USB and VGA ports
5.7-inch digital high-definition LCD display
Built-in large-capacity lithium battery, can complete 320 times of connection and heating
Real-time accurate display of battery remaining
U disk automatic software upgrade

Product features

AV6471A FTTH optical fiber fusion splicer is a new optical fiber fusion splicing equipment with compact design, simple operation and easy portability.
AV6471A FTTH optical fiber fusion splicer is not only suitable for FTTH environment, but also can be used in all optical cable line engineering construction, line maintenance, emergency repair, production testing of optical fiber devices, and research and teaching in scientific research institutes including trunk lines.

Main purpose

Main technical indicators

Fiber Type
SM (Single Mode), MM (Multi Mode), DS (Dispersion Shift), NZDS (Non-Zero Dispersion Shift)
splice loss
0.02dB(SM)，0.01dB(MM)，0.04dB(DS)，0.04dB(NZDS)
return loss
better than 60dB
Operation method
Fully automatic, semi-automatic, manual
Fiber Alignment
Advanced PAS Alignment
Applicable fiber
Leather cable, SC and other connectors (optional) and 0.25mm, 0.9mm ordinary fiber
cutting length
8～16mm
magnification
304/152 times
Image display
High-performance 5.7-inch LCD screen, providing clear, detailed image display
Tension test
Standard 2N (optional)
Thermal casing
60mm, 40mm and a range of heat shrink tubing
battery capacity
Typical splicing 320 times, charging time is about 3.5 hours (can be used while charging)
Battery Life
The number of cycles of charging is 300 to 500 times, and the customer can replace it by himself
Electrode life
Typical value is 4000 times, the electrode can be replaced by the customer
construction lighting
Built-in high-brightness, wide-range lighting, great convenience for night operation
Power supply
Built-in lithium battery 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A
working environment
Temperature: -10℃～+50℃; Humidity: 0～95%RH (no condensation); Altitude: 0～5000m
weight
2.7kg (without battery), 3.2kg (with battery)
Operation interface
Chinese/English
body size
W×H×D=150mm×140mm×160mm
Power supply maximum power
≤20W (excluding charging); ≤55W (including charging)
DC internal power supply
operating hours(23ºC±2ºC)
≥8h (continuous work)
≥10h (standby state)
charging time
≤3.5h (off charging)
≤4.5h (charging at startup)
DC external power (external power adapter)
enter
100~240V, 50/60Hz
output
13~14V, ≥4.4A, the center of the power plug is positive
leak current
When the input voltage is 220V, the leakage current is less than or equal to 3.5mA
Interface function
USB
Store
records
without u disk
Gives "Please insert U disk"
prompt
with u disk
Export the record, when finished, it will give the prompt "Please pull out the U disk"
software
upgrade
After performing the specific operation of software upgrade, the system should display the upgrade progress bar after inserting the U disk, and it will be completed in a few seconds. After unplugging the U disk and restarting the machine, the software version displayed on the boot interface should be the same as the version of the upgrade file in the U disk
VGA
Connect to an external monitor through the VGA interface, the monitor screen should be able to display the current screen content of the fusion splicer

automatic function

Automatic
fusion
It can complete the gap setting, collimation, spark fusion and estimated loss display of two fibers
Tension experiment
When it is turned on, the tension (1.96N) test will be automatically performed after the welding is completed, and the "tension test is normal" will be displayed after the test is completed.
automatic
heating
When turned on, the heating function can be automatically activated without pressing the heating button. The heating indicator light should be on, and a 60mm standard heat-shrinkable sleeve can be heat-shrinked successfully
Performance
Welding time
Welding time≤9s
heating time
40mm heat shrink tube
Heating time≤30s
60mm heat shrink tube
Heating time≤35s

Fiber Type	SM (Single Mode), MM (Multi Mode), DS (Dispersion Shift), NZDS (Non-Zero Dispersion Shift)
splice loss	0.02dB(SM)，0.01dB(MM)，0.04dB(DS)，0.04dB(NZDS)
return loss	better than 60dB
Operation method	Fully automatic, semi-automatic, manual
Fiber Alignment	Advanced PAS Alignment
Applicable fiber	Leather cable, SC and other connectors (optional) and 0.25mm, 0.9mm ordinary fiber
cutting length	8～16mm
magnification	304/152 times
Image display	High-performance 5.7-inch LCD screen, providing clear, detailed image display
Tension test	Standard 2N (optional)
Thermal casing	60mm, 40mm and a range of heat shrink tubing
battery capacity	Typical splicing 320 times, charging time is about 3.5 hours (can be used while charging)
Battery Life	The number of cycles of charging is 300 to 500 times, and the customer can replace it by himself
Electrode life	Typical value is 4000 times, the electrode can be replaced by the customer
construction lighting	Built-in high-brightness, wide-range lighting, great convenience for night operation
Power supply	Built-in lithium battery 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A
working environment	Temperature: -10℃～+50℃; Humidity: 0～95%RH (no condensation); Altitude: 0～5000m
weight	2.7kg (without battery), 3.2kg (with battery)
Operation interface	Chinese/English
body size	W×H×D=150mm×140mm×160mm
Power supply maximum power	≤20W (excluding charging); ≤55W (including charging)
DC internal power supply	operating hours(23ºC±2ºC)		≥8h (continuous work)
			≥10h (standby state)
	charging time		≤3.5h (off charging)
			≤4.5h (charging at startup)
DC external power (external power adapter)	enter		100~240V, 50/60Hz
	output		13~14V, ≥4.4A, the center of the power plug is positive
	leak current		When the input voltage is 220V, the leakage current is less than or equal to 3.5mA
Interface function	USB	Store records		without u disk		Gives "Please insert U disk" prompt
				with u disk		Export the record, when finished, it will give the prompt "Please pull out the U disk"
		software upgrade		After performing the specific operation of software upgrade, the system should display the upgrade progress bar after inserting the U disk, and it will be completed in a few seconds. After unplugging the U disk and restarting the machine, the software version displayed on the boot interface should be the same as the version of the upgrade file in the U disk
	VGA	Connect to an external monitor through the VGA interface, the monitor screen should be able to display the current screen content of the fusion splicer
automatic function	Automatic fusion		It can complete the gap setting, collimation, spark fusion and estimated loss display of two fibers
	Tension experiment		When it is turned on, the tension (1.96N) test will be automatically performed after the welding is completed, and the "tension test is normal" will be displayed after the test is completed.
	automatic heating		When turned on, the heating function can be automatically activated without pressing the heating button. The heating indicator light should be on, and a 60mm standard heat-shrinkable sleeve can be heat-shrinked successfully
Performance	Welding time		Welding time≤9s
	heating time		40mm heat shrink tube		Heating time≤30s
			60mm heat shrink tube		Heating time≤35s

BUSINESS

Calibration and Test

Intelligent Equipment

Photoelectric Instrument

Program Consultation

Your location：Photoelectric Instrument >Photoelectric Equipment

Product introduction

Product features

Main purpose

Main technical indicators