+86-27-87981730
ovmc@ggjlz.com
+86-27-87981730
ovmc@ggjlz.com
Contact Us
+86-27-87981730
+86-27-87981619
ovmc@ggjlz.com 
80# Fifth Hi-tech Avenue,East Lake Hi-tech Development zone,Wuhan,China 
Product introduction:
Compared with ordinary single-mode fiber, bending-insensitive single-mode fiber has greatly improved bending performance through optimized design. Bend-insensitive single-mode fibers have two very attractive properties: one is low intrinsic loss; the other is excellent macrobend characteristics.
Features:
1. Excellent macrobending characteristics including L-band
2. PMD link design value below 0.08ps/√km
3. Low microbending loss
4. Low splice loss and high splice efficiency
5. Precise geometric parameters
1. Special purpose short-distance optical cable
2. High-performance optical networks operating in O-, (E), S-, C- and L-bands
3. FTTX high-speed optical routing
4. Optical cables with special bending requirements
5. Small size optical devices
6. Optical fiber hydrophone
Product indicators
Fiber Type | condition | Typical product | ||||
Product number | BI1011-A | BI1012-A | BI1013-A | BI1014-A | ||
optical performance | ||||||
Attenuation (dB/km) | 1310nm | ≤0.39 | ≤0.52 | ≤0.35 | ≤0.35 | |
1383nm | ≤0.35 | ≤0.35 | ||||
1490nm | ≤0.26 | ≤0.52 | ||||
1550nm | ≤0.23 | ≤0.33 | ≤0.21 | ≤0.21 | ||
1625nm | ≤0.25 | ≤0.33 | ≤0.23 | ≤0.23 | ||
Zero dispersion wavelength point (nm) | ≤1420 | ≤1450 | 1312±12 | 1312±12 | ||
Cable cut-off wavelength λcc (nm) | ≤1260 | ≤1260 | ≤1260 | ≤1260 | ||
Mode Field Diameter MFD (um) | 1310nm | 6.5±0.4 | 5.6±0.4 | 8.8±0.4 | 8.8±0.4 | |
1550nm | 7.4±0.5 | 6.5±0.5 | 9.8±0.5 | 9.8±0.5 | ||
geometric performance | ||||||
Cladding Diameter (um) | 124.8±1.0 | 124.8±1.0 | 124.8±0.7 | 124.8±0.7 | ||
Cladding out-of-roundness (%) | ≤1.0 | ≤1.0 | ≤0.7 | ≤0.7 | ||
Coating diameter (um) | 245±7 | 245±7 | 245±5 | 245±5 | ||
Core/Package Concentricity Error (um) | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.6 | ||
mechanical performance | ||||||
Screening tension (kpsi) | offline | 100 | 100 | 100 | 100 | |
Macrobend Additional Attenuation | ||||||
1 turn φ15mm (dB) | 1550nm | ≤0.05 | ≤0.01 | ≤0.2 | ||
1 turn φ15mm (dB) | 1625nm | ≤0.10 | ≤0.02 | ≤0.5 | ||
1 turn φ20mm (dB) | 1550nm | ≤0.02 | ≤0.005 | ≤0.75 | ≤0.1 | |
1 turn φ20mm (dB) | 1625nm | ≤0.05 | ≤0.005 | ≤1.5 | ≤0.2 | |
10 turns φ30m (dB) | 1550nm | ≤0.01 | ≤0.002 | ≤0.25 | ≤0.03 | |
10 turns φ30mm (dB) | 1625nm | ≤0.02 | ≤0.005 | ≤1.0 | ≤0.1 | |
Environmental Features 1310nm, 1550nm and 1625nm | ||||||
Temperature additional attenuation (dB/km) | -60℃ to 85℃ | ≤0.05 | ≤0.05 | ≤0.05 | ≤0.05 | |
The maximum standard section length is 50.4km, and longer sections can be provided according to customer needs.
Customer customization can be provided, such as different geometric indicators, numerical aperture and screening tension.
Tel：+86-27-87981730 Email：ovmc@ggjlz.com,yuyan@ggjlz.com Address：80# Fifth Hi-tech Avenue,East Lake Hi-tech Development zone,Wuhan,China Zip code：430205 Technical Support：金百瑞
©2017Optics Valley Metering & Calibration Co.,Ltd ALL RIGHT RESERVED鄂ICP备17005403号-1 鄂公网安备 42011102002761号
